|
STICK
ELECTRODE
|
| Electrode
Name |
AWS
Classification |
Recm'd
Polarity |
General
Description |
- Jetweld 3
|
- E7024
|
- AC
- DC
|
- Jetweld 3's
high deposition rates, and smooth bead make it
great for welding on mild steel. I is
especially effective for multipass welds and
fast fill single welds
|
- Fleetweld 37
|
- E6013
|
- AC
- DC
-
|
- Here's a
terrific all-position electrode for low amperage welding
on sheet metal - especially in applications where appearance is
important. We've designed Fleetweld 37 for excellent performance
with smaller AC welders with low open-circuit voltages. It's an
excellent choice for jobs involving irregular or short welds that require a
change in position.
|
- Jetweld LH®-70
|
- E7018H4R
|
- DC+
- AC
|
- A top-choice electrode for welding on thick sections and restrained joints when cracking is an issue. It's also a good call when the project involves hard-to-weld steels. Jetweld LH-70 also offers high deposition rates.
|
- JeT-LH-78 MR
|
- E7018H4R
|
- DC+
AC
|
- Great for jobs on mild steel and some high-strength low-alloy steels. It also tolerates high sulfur and high silicon steels. Jet-LH 78 MR features higher tensile strength for stress-relieved properties.
|
- Excalibur®7018
|
- E7018 H4R
|
- DC+
AC
|
- There's a long list of reasons why operators are so loyal to Excalibur 7018. They tell us they love the clean puddle, the square coating
burnoff, the easy all-position handling and the excellent wash-in characteristics. It's a terrific choice for jobs that involve steels with poor
weldability.
|
- Excalibur®7018-1
|
- E7018-1 H4R
|
- DC+
AC
|
- When the job involves critical, out-of-position welding, reach for
Lincoln Electric's Excalibur 7018-1. It offers a beautifully clean
weld puddle, uniform slag follow, and superior wash-in with no
undercutting. Also great for welding on steels with marginal
weldability
|
- Jet®-LH 8018-B2
|
- E8018-B2 H4R
|
- DC+
AC
|
- If your welding involves 1-1/4% chromium and 1/2% moly pipe, tubes, boilers or castings, you'll want Jet-LH 8018-B2 MR as your welding electrode. It offers a 1-1/4% chromium and 1/2% molybdenum deposit. Reach for this electrode when operating temperatures exceed 850°F (450°C).
|
- Jet-LH 8018-C3 MR
|
- E8018-C3 H4R
|
- DC+
AC
|
- An excellent stick electrode with excellent impact properties. Jet-LH 8018-C3 MR produces a nominal 1% nickel deposit that is a great fit for a wide range of welding applications, A good choice
for welding on weathering type steels
|
- Jet-LH 9018-B3 MR
|
- E9018-B3 H4R
|
- DC+
AC
|
- Great low hydrogen stick electrode. For welding 2-1/4% chromium and 1% molybdenum steels when heat treating is required. Good mechanical properties in the as-welded and stress relieved condition. A great choice when temperatures exceed 850°F (450°C).
|
- Fleetweld 5P
|
- E6010
|
- DC+
|
- Fleetweld 5P is a great choice for welding on dirty, rusty, greasy
or painted steel - especially in vertical or overhead applications
|
- Fleetweld 5P+
|
- E6010
|
- DC+
|
- Lincoln's Fleetweld 5P+ is ideal for steel that's less than clean. It's a first choice for pipe welding, and vertical-up and overhead plate welding. This electrode is a long-time favorite among operators who handle cross-country and in-plant pipe welding.
|
- Shield-Arc 70+
|
- E8010-G
|
- DC+
|
- Here's an electrode that makes short work of even the most
challenging high silicon pipe applications! Shield Arc 70+ is an outstanding choice for API 5LX-56 through X-70 grade pipe, as well as for a wide range of sheet metal welding assignments.
|
- Shield-Arc 90
|
- E9010-G
|
- DC+
|
- An all-position pipe electrode that's a great choice when the task is vertical down welding on API 5LX-70 through X-80 pipe. SA-90 also performs well in situations where low hydrogen processes are not practical, and when welding on dirty steels.
|
| Electrode
Name |
AWS
Classification |
|
General
Description |
|
- Lincoln ER70S-2
|
- ER70S-2
|
-
|
- Triple deoxidized rod which produces high
quality x-ray quality welds over most surface conditions.
|
- Lincoln ER70S-6
|
- ER70S-6
|
-
|
- High quality rod with higher levels of Mn and Si which produces sound welds with excellent
wetting action.
|
- Lincoln ER308/308L
|
- ER308, ER308L
|
-
|
- ER308/308L For joining 304 and 304L and other "18-8" stainless steels.
|
- Lincoln ER309/309L
|
- ER309, ER309L
|
-
|
- For 309 stainless steels and joining carbon steels or low alloy steels to
stainless steels.
|
- Lincoln ER316/316L
|
- ER316, ER316L
|
-
|
- For joining 316L stainless steels.
|
| Electrode
Name |
AWS
Classification |
|
General
Description |
|
- SuperArc L-50
|
- ER70S-3
|
-
|
- Our most popular MIG wire, SuperArc L-50, premium copper coated wire, is an excellent choice for 50,000 psi (345 MPa) yield strength, carbon steel base materials. SuperArc L-50 has moderate levels of silicon and manganese for
deoxidation and cleaning action. Designed for use on clean, oil-free, and rust-free base material. Will tolerate light millscale. SuperArc L-50 also has an excellent reputation for feedability and trouble-free performance. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, straight carbon dioxide.
|
- SuperGlide S3
|
- ER70S-3
|
-
|
- SuperGlide S3, our premium bare MIG wire, like our SuperArc L-50, is an excellent choice for 50,000 psi (345 MPa) yield strength, carbon steel base materials. SuperGlide S3 has moderate silicon and manganese deoxidizer levels and has an excellent reputation for feedability and trouble-free performance. Designed for use on clean, oil-free, and rust-free base material. Will tolerate light millscale. SuperGlide S3 MIG wire is an excellent choice when a bare or non-copper coated ER70S-3 wire is preferred. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, straight carbon dioxide, and three or four-part gas mixes.
|
- SuperArc L-54
|
- ER70S-4
|
-
|
- SuperArc L-54 premium copper coated MIG wire is your first choice when welding
on metals with a light to medium presence of millscale. For best performance, use
on clean, oil-free, and rust-free base material. Improved wetting at the toes of a weld when compared to welds made with ER70S-3 electrode. SuperArc L-54 has higher silicon and manganese deoxidizer levels than AWS ER70S-3 electrodes to tolerate moderate levels of millscale. Shielding gases include argon/carbon dioxide blends, argon/ oxygen blends, straight carbon dioxide, and three or four-part gas mixes.
|
- SuperArc L-56
|
- ER70S-6
|
-
|
- Lincoln's premium copper coated MIG wire, SuperArc L-56 is an excellent choice for welding on metals with a medium to high presence of millscale. For best performance use on clean, oil-free, and rust-free base material. Best weld appearance and toe wetting when compared to ER70S-3 and ER70S-4 classifications. SuperArc L-56 has high silicon and manganese deoxidizer levels. Superior feedability and excellent arc characteristics are trademarks of SuperArc L-56. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, straight carbon dioxide, and three or four-part gas mixes.
|
- SuperGlide S6
|
- ER70S-6
|
-
|
- Lincoln's premium bare, mild steel MIG wire, SuperGlide S6 is an excellent choice for welding on metals with a medium to high presence of millscale. For best performance use on clean, oil-free, and rust-free base material. S6 will tolerate higher levels of surface contaminants than ER70S-3 or S-4 electrodes. Best weld appearance and toe wetting when compared to ER70S-3 and ER70S-4 classifications. High silicon and manganese deoxidizer levels. SuperGlide S6 MIG wire is the choice for you when a bare or non-copper coated ER70S-6 wire is preferred. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, straight carbon dioxide, and three or four-part gas mixes.
|
- SuperArc LA-75
|
- EfflOS-Ni1
|
-
|
- SuperArc LA-75 is a premium copper coated, low alloy MIG wire certified to meet 80,000 psi (552 MPa) minimum tensile strength. Optimal mechanical properties are achieved with a 98-95% argon, 2-5% oxygen shielding gas blend. Can be welded with 90% argon, 10% carbon dioxide gas blend, as well as 75% argon. 25% carbon dioxide mixture. Charpy V-Notch impact testing meets or exceeds 20 ft.
lbs. (27 J) at -50°F (-46°C). LA-75 delivers a weld deposit with outstanding corrosion resistance for use on ASTM A588 weathering steels.
|
- SuperArc LA-90
|
- ER8OS-D2
ER9OS-D2 (ER90S-G)
|
-
|
- SuperArc LA-90 is our premium copper coated, low alloy MIG wire manufactured to meet tensile strength requirements of 80,000 to 90,000 psi (552-620 MPa) minimum. The addition of 0.5% molybdenum provides strength after stress relief. Ideal selection when welding ASTM A182, A217, A234 and A335 high temperature pipe, fittings, flanges and valves and A336 pressure vessel forgings. Best mechanical properties are achieved with an 98-95% argon, 2-5% oxygen shielding gas blend.
|
- SuperArc LA-100
|
- ER100S-G
(ER110S-G) MIL-100S-1 (Military)
|
-
|
- SuperArc LA-100, our premium copper coated, low alloy MIG wire is designed
for use on 100,000 psi (690 MPa) tensile base material and those materials ML-100S-1 that require a minimum yield strength of 82,000 psi (565 MPa). Excellent for welding on ASTM A514, A543, A724 and A782 quenched and tempered plate or HY-80 base material. LA-100 provides excellent impact properties under higher heat input conditions. Best mechanical properties are achieved with an 98-95% argon, 2-5% oxygen shielding gas blend or 95% argon/5% oxygen. Also meets MIL-E-23765/2C, /2D, /2E specifications as a MIL-1 OOS-1 classification.
|
- SuperGlaze 1100
|
- ER1100
|
-
|
- SuperGlaze 1100 is highly
resistant to chemical corrosion and has good crack resistance. Suitable for electrical and chemical applications utilizing aluminum base metal with little or no alloying elements. Like all 1XM filler alloys, Lincoln's SuperGlaze 1100 is the softest aluminum MIG wire and requires extra care to ensure good feeding.
|
- SuperGlaze 4043
|
- ER4043
|
-
|
- SuperGlaze 4043 is a great choice for the welding of heat-treatable base alloys and more specifically the 6XXX series alloys. It has a lower melting point and more fluidity than me 5XXX series filler alloys and is preferred by welders because of its favorable operating characteristics. ER4043 type wires are also less sensitive to weld cracking with the 6XXX series base alloys. SuperGlaze 4043 is suitable for sustained elevated temperature service, i.e. above 150=F (65°C).
|
- SuperGlaze 5356
|
- ER5356
|
-
|
- SuperGlaze 5356 is our most popular aluminum MIG wire. It is a great general purpose filler alloy designed for the welding of 5XXX series alloys when 40,000 psi (276 MPa) tensile strength is not required. 5356 is often chosen for its high shear strength.
|
- SuperGlaze 5554
|
- ER5554
|
-
|
- SuperGlaze 5554 is intended as a matching filer alloy when welding 5454 base alloys. This alloy is a lower magnesium content alloy and is often used for automotive wheels, over-the-road trailers, and rail tank cars where the weld filler metal chemistry must closely match the base material chemistry to maximize corrosion performance.
|
- SuperGlaze 5556
|
- ER5556
|
-
|
- SuperGlaze 5556 weld deposits will provide matching tensile strengths for the 5XXX alloys, such as 5083 and 5654. Contains increased amounts of magnesium or manganese compared to SuperGlaze 5356.
|
| Electrode
Name |
AWS
Classification |
Recm'd
Shielding Gas |
General
Description |
|
- Metalshield MC-6
|
-
|
- 75-95% Argon with a balance of
CO2, or 95-98% Argon with a balance
of C02
|
- For high quality welds that require a great bead shape, appearance and low spatter level, you can't beat MC-6! Combining the arc characteristics of MIG with the performance benefits of flux-cored welding, MC-6 is capable of fast travel speeds and high deposition rates with low smoke and spatter under high argon gas blends,
|
- Outershield
MC-710XL
|
- E70C-6M
|
- 75-95% Argon with a balance
of C02.
|
- This is a low-spatter, virtually slag-free electrode that produces amazingly smooth, clean welds time after time with a much higher deposition rate than solid MIG wires. Can be used out-of-position with short arc and pulsed arc,
|
- Outershield MC-900
|
- E90C-G
|
- 75-90% Argon with a balance of
C02.
|
- Virtually spatter-free performance, reduces clean-up time/ This electrode is designed for high-speed welding where exceptional bead wetting is important. Use MC-900 on HSLA steels - including HY80 and ASTM A710, as well as on high strength steels.
|
- Oufershield MC-1100
|
- E110C-G
|
- 75-90% Argon
with a balance
of CO2
or 90% Argon/ 7.5% C02/ 2.5% 02
|
- Exceptional bead wetting in high-speed welding applications! Spatter is almost non-existent with MC-1100. Use this quality wire on HSLA steels such as ASTM 514, HY-100 and T1 steels with tensile strengths of 110,000 psi.
|
 |
|
|
|
| Straight Cutting Torches & Machines |
|
|
Straight Cutting Torches "FC" Models |
|
"CST 800FC" Straight Style Torch |
|
Machine Torches |
|
Billet & Foundry Cutting Torches |
| Cutting Machines |
|
VCM 200 Portable Cutting Machine |
|
MHT 100 Motorized Hand Torches |
|
Auto 24 Cutting Machine |
| Cutting
Tips |
|
One Piece - Acetylene |
|
Two Piece - Liquid Air Fuel, Mapp® & Propylene |
|
One/Two Piece - Natural Gas & Propane |
|
Heating Tips - Acetylene, Natural Gas & Propane |
|
Fire-Stick™ |
| Safety Accessories |
| Check Valves, Flashback Arresters, etc. |
| Victor® Welding Cutting & Heating Outfits |
|
"Select™" Welding & Cutting Outfits |
|
"VanGuard®" Welding & Cutting Outfits |
|
Portable Torch, Mini & Micro Outfits |
| Medalist® Equipment |
|
Pressure Regulators |
|
Flowmeters & Flowgauges |
|
Welding & Cutting Apparatus |
|
Medalist EXL Welding & Cutting Outfits |
|
Portable Tote |
|
